DS4 / MC4 Solar Panel Connector 1500V DC IP68

Product Specifications

Connector system	6.0mm2 / 10.0mm2
Rated voltage	IEC 1500V&UL 1500V
Rated current @IEC (85)	41A (4.0mm2 / 12AWG) 46A (6.0mm2 / I0AWG) 55A (10.0mm2 /8AWG)
Rated impulse voltage	16KV
Ambient temperature range	-40 ~+85
Contact resistance	<0.5mOhm
Application degree	Class A
Protection class	Class
Pollution degree	2
Degree of Protection	IP68 (1m, Ih) , mated IP2X, unmated
Flame class	UL94-VO
Insulation material	m-PPE/PA
Contact material	Copper, Tin-plated
Type of termination	Crimping
Locking system(UL)	Locking type
TUV ,1EC62852	R50369705/R50385924
UL,UL6703	E486009

 

The Connector Liability Exemption Clause

There exist following case, and lead to product goes wrong, any loss caused, product manufacturers will not take any responsibility,

Product Transportation and Storage

1. Products in the process of transportation, warehouse, cannot store with "attachment 2" in the table of chemicals together that lead the product pollution with these chemicals;

2. Products in the process of transportation, warehouse, cannot pressure too much on products and such as impact damage behavior;

3. Products in the process of transportation, warehouse, should room temperature storage, avoid light, should waterproof, dustproof, and should be paid attention to protection, so as not to reduce product performance, pay special attention to product when in power station;

4. Product is recommendation finished installation in one year.

Product Installing and Operating

1. The product health working environment temperature - 40 ~ + 85

2. 2.2 The Product installing should be in accordance with the Diwan Solarproduct installation instructions;

3. Products in the coastal, desert dust, dust more regional use, before the products leave the factory, they must take the dust cap;

4. Products used in roof power station, the connector shall not directly on the surface of the roof.

5. Products and chemical compatibility see Chemical resistance form.

6. The connector under the condition of disconnect, the product will not be able to meet any IP protection grade, also can't normal use.

7. Products meet IP68 degree of protection requirement after connects, while it can't work under water for a long time, and it can’t be put on the surface of roof to avoid the strong sunlight.

8. Connector in the case of disconnect, should not place in the outdoor for long time, so may be the cause of the corrosion of the metal, and lower the connector performance.

9. Connector in the process of outdoor installation and use, if not to connect in time, please do a good job in the connector protection, put on the dust cap and protect the connector from water, dust and other pollution, affect the product performance.

10. Connector in the process of installation and use should not be collision, drag in the water, grass, and the ground to prevent the pollution of inside the connector before use, reduce the product performance.

11. Connectors of Diwan Solar brand must be connected with connectors appointed by Diwan Solar